Contract Heat Treatment
For requirements outside the standard list: special alloys, special curves, special batch sizes. Sample first, then production run.
- Other alloys on request
- Custom temperature curves
- Sample → production flow
Furnace mouth
Contract heat treatment in controlled-atmosphere pit furnaces.
Hardening and tempering. 42CrMo, 42CrMoA and other alloys — under our own measurement and control discipline.
Capacity
Our plant in numbers.
| Max part diameter | Ø1200 mmPit furnace inner dimension |
|---|---|
| Max part length | 2.6 mPot inner depth |
| Max load per batch | 2.5 tonGross batch weight |
| Tempering pots | 2Two parallel temperature curves |
| Standard alloys | 42CrMo · 42CrMoAOthers on request |
A hardness test report for every batchThe hardness of every batch we treat is measured and reported.
A part's path through heat treatment.
Controlled atmosphere, measured temperature curves, a hardness check on every batch.
- 1
Heating
Heated to hardening temperature in a pit furnace.
- 2
Quenching
Cooled under control.
- 3
Tempering
Relieves the stress of quenching and adds toughness.
- 4
Report
A hardness test report for every batch.
Hardness test reportEvery batch
Five processes. One discipline.
Controlled atmosphere, measured temperature curves, a hardness check on every batch.
Hardening (quenching)
The part is heated to hardening temperature in a pit furnace, then cooled under control in oil or air.
Tempering
Relieves the stress of quenching and adds toughness. With two tempering pots, two distinct temperature curves can run in parallel on the same day.
Stress relieving
Reduces the internal stress left in a part by machining, welding or forming.
Normalising
Evens out the structure after forging or rolling and prepares the part for the next steps.
Soft annealing
Lowers hardness so the part is easier to machine.
A hardness test report for every batch
The hardness of every batch we treat is measured and reported.
Production & Integration
We also make hydraulic breaker spare parts on our own machines and treat them in our own pit furnaces. We apply the same metallurgy to our own parts as to our customers’.
- Chisel, piston, bushing, repair kit
- Same plant, same discipline
- Cataloguekervanbreaker.com
- Online shopkiriciparca.com
Temperature rises with patience.
A furnace is not a bench; it is a clock. Every reading from the thermocouple, every oxygen level in the atmosphere, every minute on the curve — all of it is written into the part. There is no rushing here; the right temperature, the right time, the right cooling.
Our plant: parts and fixtures ready to load 
Furnace mouth 
Gauge and valve cabinet 
Closed furnace
Kervan Isıl İşlem ve Makine San. Tic. Ltd. Şti.
Kartepe · Kocaeli · Türkiye
We provide contract heat treatment in Kartepe / Kocaeli, in the heart of Türkiye's industrial corridor. We measure the part, run the process, verify the result and ship it back — with the same discipline every time. Behind every batch is a hardness test.
One message, one answer.
Share the drawing or material spec — we will get back to you within twenty-four hours.
- info@kervanheat.com
- Hours
- Mon–Sat · 08:00–18:00